LED UART CONTROLLER
This led controller runs code written by Mitch Lustig.
It allows for vesc communication over UART. Led settings can be configured in vesc tool.
Features directional headlights and taillights, and status bar support.
IMPORTANT! READ CAREFULLY
This controller is not as simple to install as the WLED Controller. If you want the easiest installation purchase that instead.
This controller will use your UART port, and you will lose the option for external bluetooth or remote over UART by installing this.
The installed code will only work with this specific fork of Float Package 2.0. Click to download.
As I did not write the code for this, I cannot guarantee compatibility with any other package builds, or any future builds. As of now, it only works with this package version.
Requires 5v input via JST-PH connector. Do not power directly off vesc 5v rail, use a separte power supply.
5v must share a ground reference with the vesc, or it will not work. Compatible with my 5v power unit.
Intended for use with SK6812 Led strips. Your build may or may not require additional resistors on the signal line if you experience flickering. Your results may vary.
Use less than 50 pixels total for best performance.
Dimensions: 28x30mm
Versions:
1.2 - Standard version - Green PCB
1.1 - Prototype - Black PCB with a minor manufacturing defect. I had to cut a trace on the pcb and one of the indicator lights doesn’t work. Otherwise software and all outputs work as expected. Identical form factor.
This led controller runs code written by Mitch Lustig.
It allows for vesc communication over UART. Led settings can be configured in vesc tool.
Features directional headlights and taillights, and status bar support.
IMPORTANT! READ CAREFULLY
This controller is not as simple to install as the WLED Controller. If you want the easiest installation purchase that instead.
This controller will use your UART port, and you will lose the option for external bluetooth or remote over UART by installing this.
The installed code will only work with this specific fork of Float Package 2.0. Click to download.
As I did not write the code for this, I cannot guarantee compatibility with any other package builds, or any future builds. As of now, it only works with this package version.
Requires 5v input via JST-PH connector. Do not power directly off vesc 5v rail, use a separte power supply.
5v must share a ground reference with the vesc, or it will not work. Compatible with my 5v power unit.
Intended for use with SK6812 Led strips. Your build may or may not require additional resistors on the signal line if you experience flickering. Your results may vary.
Use less than 50 pixels total for best performance.
Dimensions: 28x30mm
Versions:
1.2 - Standard version - Green PCB
1.1 - Prototype - Black PCB with a minor manufacturing defect. I had to cut a trace on the pcb and one of the indicator lights doesn’t work. Otherwise software and all outputs work as expected. Identical form factor.
This led controller runs code written by Mitch Lustig.
It allows for vesc communication over UART. Led settings can be configured in vesc tool.
Features directional headlights and taillights, and status bar support.
IMPORTANT! READ CAREFULLY
This controller is not as simple to install as the WLED Controller. If you want the easiest installation purchase that instead.
This controller will use your UART port, and you will lose the option for external bluetooth or remote over UART by installing this.
The installed code will only work with this specific fork of Float Package 2.0. Click to download.
As I did not write the code for this, I cannot guarantee compatibility with any other package builds, or any future builds. As of now, it only works with this package version.
Requires 5v input via JST-PH connector. Do not power directly off vesc 5v rail, use a separte power supply.
5v must share a ground reference with the vesc, or it will not work. Compatible with my 5v power unit.
Intended for use with SK6812 Led strips. Your build may or may not require additional resistors on the signal line if you experience flickering. Your results may vary.
Use less than 50 pixels total for best performance.
Dimensions: 28x30mm
Versions:
1.2 - Standard version - Green PCB
1.1 - Prototype - Black PCB with a minor manufacturing defect. I had to cut a trace on the pcb and one of the indicator lights doesn’t work. Otherwise software and all outputs work as expected. Identical form factor.